OZONE ANALYZER BMT 965 ST

Rated 5.00 out of 5

OZONE ANALYZER BMT 965 ST

standard version (panel mount) High concentration ozone analyzer, with temperature/pressure compensation, ranges: 50, 100, 200, 300, 400, 500, 600 g/Nm3, units selectable: g/Nm3, %wt/wt, ppmv, bar, psi, Torr Options: lower and lowest ranges 20, 10, 5, 2 g/Nm3, internal purge unit for fully automatic zeroing

Description

These parameters can be set with the three pushbuttons on the front panel as well as by connecting the serial interface or USB port to a Windows-PC running the program BMT 965 Link, which is supplied with each instrument. Another way of configuring the instrument is to use the so-called Link Mode via the serial or USB interface. The instrument has a built-in clock with calendar, which is used to provide time stamps for an Event-Log and an Error-Log (e.g. Overrange, Cuvette Dirty) with virtually unlimited capacity on an internal 8 GB SD card. Additionally, concentration data can be logged in configurable time intervals into binary and CSV (Excel) files. The binary logs can be read out and printed via the USB port with the mentioned program BMT 965 Link. Excel can open the CSV concentration log directly on the BMT 965, because the instrument will show up on the PC as an external drive when connected via USB, allowing simple copy action of stored files using Windows Explorer without installing any additional software or drivers. The USB port supports OTG (On-the-Go) functions, which means that the BMT 965 can be used as a USB device (mass storage and HID) or host (mass storage). This way also a USB flash drive (stick) can be connected to the instrument. Log data from the internal SD card can be copied to the USB flash drive by pressing a single button on the front panel. Firmware updates using a USB flash drive are easily done.

The OZONE ANALYZER BMT 965 is a microprocessor-based dual beam photometer (UV 254 nm) for measuring the ozone content in air or oxygen. To evaluate the ozone content in the sample gas the OZONE ANALYZER BMT 965 measures the UV radiation in the measurement channel, the UV radiation in the reference channel, the temperature and the pressure in the cuvette. The ozone concentration is displayed in either percent weight of ozone (%wt/wt), grams of ozone per normal cubic meter of sample gas (g/Nm3 ) or ppmv (AQ: g/m3 or ppmw) on a 16-character alphanumeric display. The concentration unit can be changed during operation. Additional modifiable parameters are, among others:  Unit of pressure display (selectable: bar, psi, Torr, MPa)  Alarm parameters (high/low threshold, alarm latching, audible, opening or closing relays)  Nature of the carrier gas: air or oxygen (incl. PSA)  Date and time  RS-232 interface parameters  Logging parameters

Product Details

OZONE ANALYZER BMT 965 ST

Message sent